Category: IDTechEx

Page 1 of 29 1 2 3 4 29

ELIX Wireless EV charging using their Magneto Dynamic Coupling (MDC) technology

Posted by Charbax – January 8, 2018

ELIX Wireless has developed Magneto Dynamic Coupling (MDC) technology and has been deploying wireless chargers for automobiles. They are in trials with EV companies in China and USA. Their solution uses low frequency, so no heat, no EMI, safe to use, has the ability to work in the rain, can push aside debris. They have built and deployed 7.7KW chargers, these are undergoing trials, the company is also making 3.3KW and 22KW chargers which will be beta tested in 2018.

Tacterion shows Highly Flexible Stretchable Sensor for Smart Clothing of the future

Posted by Charbax – January 4, 2018

Tacterion shows their innovative and unique capacitive+resistive technology is a highly flexible and stretchable sensor called sensorskin which consists of silicone polymer material and is completely stretchable. Sensors can be deployed on the surface of 3D-curved and even deformable objects for detecting and characterizing interaction and pressure on any surface. The technology is optimized for environments that require the products to be sensitive and extremely robust at the same time. The target markets are Robotics, MedTech, Automotive, Industrial applications and HMI (e.g. Consumer Electronics). Filmed at the IDTechEx Show!

ThinSkin Movable wall for Hotels and Exhibition

Posted by Charbax – January 4, 2018

ThinSkin makes movable wall for exhibition and for home.They claim that we can change or add the new capacity of electricity and water to the house any time after the installation.They claim that they can build the hotel and room very fast without rebuilding the entire housing plan. Filmed at the IDTechEx Show!

3D Printed Pendrive from TNO

Posted by Charbax – January 4, 2018

TNO is the research institute who helps to decrease the gap between the university and Industry.They are working in additive manufacturing since last 20 years.They are showing the selective laser 3D printed part along with the stereolithography processed part as a 3D printed pendrive case.They can perform shared research for the company where they develop new material and new method of manufacturing for respective industry. Filmed at the IDTechEx Show!

Smart T-shirt with heart rate monitor by AiQ

Posted by Charbax – January 4, 2018

AiQ is showcasing their wearable apparels with the sensors like heart rate monitor,motion sensor,temperature sensor. Here they are showcasing the heart rate monitor and logger T-shirt which sends the data to the server via Bluetooth. Filmed at the IDTechEx Show!

Terrafugia Flying Car Interview

Posted by Charbax – December 8, 2017

Terrafugia's The Transition is the world’s first practical flying car. It offers the convenience of driving and the speed of flight, and will incorporate autonomous technologies that will make the Transition safer than any other small aircraft in the sky. Terrafugia has already developed and flown two full-scale prototypes, and has received all of the special legal approvals necessary to bring the Transition to market in the USA. And for the the Future, Terrafugia’s plans to later release the TF-X, a mass-market flying car with the potential to revolutionize the way people get around. An all-electric vehicle with vertical takeoff and landing (VTOL) capabilities and computer-controlled flight, the TF-X is the flying car of the future. This video was filmed at the IDTechEx Show! You can also watch Terrafugia's presentation video here.

Terrafugia Flying Car Keynote at the IDTechEx Show!

Posted by Charbax – December 8, 2017

Terrafugia CTO and Co-Founder Carl Dietrich presents Terrafugia's flying car in this presentation, including some of their innovations including sensing, IoT and autonomous systems. Terrafugia's mission is to create practical flying cars that enable a new dimension of personal freedom. With operational flying/driving prototypes and being acquired by Volvo Owner Geely. You can also watch the Interview video by Dr. Peter Harrop with Terrafugia here.

Me2EV L-Loop Lithium to Lead EV battery Range Extender

Posted by Charbax – December 8, 2017

As a solution for range anxiety for electric vehicles, http://me2ev.com presents their ME2 L-Loop Lithium to Lead battery range extender, for plug-in vehicles in places that might lack charging stations, the ME2 L-Loop is a retrofitted mobile charging station right in the trunk of the electric vehicle, Me2EV claims it's a cheap way to possibly double the range of your electric vehicle.

Distributors, potential partners or media can contact Me2EV here:
http://me2ev.com
founder@4kev.energy
+1 319.936.2504

Filmed in 4K60 at IDTechEx Show! USA 2017 using Panasonic GH5 ($1999 at Amazon.com) on firmware 2.1 (aperture priority, AF continuous tracking) with Leica 12mm f1.4 ($1297 at Amazon.com) with Saramonic Uwmic9 dual wireless lav microphone system ($399 at Amazon.com), get $25 off renting cameras and lenses with my referral link at https://share.lensrentals.com/x/wWbHqV

CLEARink wins Best Technical Development Materials at IDTechEx USA 2017

Posted by Charbax – November 23, 2017

Interview at IDTechEx show USA 2017 with Joel Pollack, board member at CLEARink, formerly responsible for Amazon Kindle display design at Lab126, also formerly CEO of Clairvoyante (now part of Samsung) and Dr Bob Fleming, CTO for CLEARink. They just won the IDTechEx award for best technical development materials. CLEARink previously won the award at SID for this reflective display technology, it uses Total Internal Reflection (TIR) to create white pixels and electrophoresis to create black pixels using black particles in a solution. Here is a video that shows how the technology works. Also see my SID video interview of their CEO, at CLEARink is targeting eSchoolbooks and Wearables, their product is low power, sunlight readable like other ePaper technologies but they are making ePaper 2.0 which offers color and video in addition to the usual benefits of ePaper.

HoIst Center for Innovation: A shared R&D space for cutting edge technology

Posted by Charbax – November 11, 2017

HoIst Center for Innovation is working on a model of shared knowledge and R&D for various industrial partners, where they work on cutting edge technology like flexible OLED displays, In-mold electronics like capacitive touch sensors, OLED lighting, NFC and switch and gates. They are also showing the stretchable printed electronics PCB which can be use in the textile and sports industry. Filmed at the IDTechEx Show!