At the IDTechEx Show! Callaghan Innovation showcases MicroMaker http://micromaker3D.com , a new type of 3D printing for microstructures. MicroMaker enables fast, easy and affordable fabrication of miniaturized structures for innumerable applications such as printed electronics, wearables, sensors and point of care.
The FluidFM μ3Dprinter, developed by Cytosurge AG, directly prints microscopic and submicroscopic complex metal structures at room temperature and ambient pressure onto existing objects or surfaces with pinpoint (micrometer) accuracy. This opens new horizons in domains such as microelectronics, MEMS or surface functionalization.
For ten years the 3D laboratory at the Technical University of Berlin has been developing applications in the fields of 3D scan, 3D print and 3D immersive (interactive) projection. The applications originate in many application fields like; mathematics and natural sciences, engineering sciences, medicine and medical technologies, geo sciences, archaeology, palaeontology, architecture, arts and design, museums etc. The 3D laboratory cooperates with research and other public institutions such as museums, as well as small and medium sized companies. Last but not least the laboratory contributes to the university teaching and provides knowledge transfer to its cooperation partners.
From prototyping and sampling for consumer goods and electronics, to industrial and medical and dental market applications, 3D printing is proving a practical, clean part of the product design and production cycle. Ricoh’s technology and services help customers lead the way as the market rapidly moves toward additive manufacturing and 3D production.
3D Printing Progress – Technologies, markets and analysis of the 3D Printing industry: http://3dprintingprogress.com
Printed Electronics World – The source for global news on printed, organic and flexible electronics, interpreted by experts: http://printedelectronicsworld.com
BotFactory brings the future of electronic circuit fabrication to your desktop with our line of PCB Printers
Just like a 3D Printer, their small circuit printers allows users to prototype in minutes instead of weeks, all at the click of a button. After pulling the Squink or SV2 PCB Printer from the box, users are guided through a seamless process that will take users from a bare substrate to a fully assembled and functional circuit board in a matter of minutes.
Each PCB Printer includes an inkjet printhead that can dispense very fine droplets of conductive ink and insulating ink, allowing users to create multilayered rigid and flexible circuits on FR-4, Kapton or any substrate of your choice.
In addition, each printer has two heads for dispensing glues and solder pastes, and another to pick-and-place components, allowing users to assemble PCBs right at the users desktop.
Printed Electronics World – The source for global news on printed, organic and flexible electronics, interpreted by experts: http://printedelectronicsworld.com
The Voltera V-One is a PCB Printer for early circuit board prototyping and PE experimentation.
Voltera helps industry leading businesses and academic institutions accelerate their product development and R&D initiatives by putting the circuit board factory on their desk. Print inks, drill vias, dispense solder pastes, and even reflow components right on the machine. Use it with your own inks or substrates as well!
Printed Electronics World – The source for global news on printed, organic and flexible electronics, interpreted by experts: http://printedelectronicsworld.com
AMSYSTEMS Center is a joint innovation center of TNO and the High Tech Systems Center of Eindhoven University of Technology (TU/e HTSC) to accelerate (new ways of) additive manufacturing in diverse industries, interviewed at the IDTechEx Show! Europe 2018
3D Printing Progress – Technologies, markets and analysis of the 3D Printing industry: http://3dprintingprogress.com
Printed Electronics World – The source for global news on printed, organic and flexible electronics, interpreted by experts: http://printedelectronicsworld.com
Brightlands Materials Center (http://brightlandsmaterialscenter.com) is a leading Research & Development Center, improving quality of life with sustainable material solutions.
3D Printing Progress – Technologies, markets and analysis of the 3D Printing industry: http://3dprintingprogress.com
Printed Electronics World – The source for global news on printed, organic and flexible electronics, interpreted by experts: http://printedelectronicsworld.com
TNO is the research institute who helps to decrease the gap between the university and Industry.They are working in additive manufacturing since last 20 years.They are showing the selective laser 3D printed part along with the stereolithography processed part as a 3D printed pendrive case.They can perform shared research for the company where they develop new material and new method of manufacturing for respective industry. Filmed at the IDTechEx Show!
Ceradrop, a MGI Group company, designs and markets Materials Deposition Digital Printers for Printed Electronics Industry and Smart 3D Printing. Embedding all types of printheads as well as the latest generation of curing modules, CeraPrinter Series models present new opportunities for feasibility study and launch of new products into the Printed Electronics market in the fields such as: flexible solar cells (OPV), OLED Displays, Smart Cards, Antennas, Smart Systems, Passive Components and others. CERADROP provides materials deposition digital printing solution for advanced R&D up to 24/7 high performance manufacturing with full automation. Achieving more than 75% of its turnover from export and providing a unique process support to its customers, CERADROP is supported by the MGI Group network in 70 countries with 50 representatives.
Cubibot (successfully crowdfunded at Kickstarter) is a $499 (targeted retail price) cloud based 3D Printer that was developed for over three years, here presented by Sina Noorazar, CDO, Cubibot, providing possibly the best features-for-price ratio in the industry. The Cubibot 3D printer includes:
– Heated print bed
– Wi-Fi Enabled
– Easy to use web-based software
– Smart status notification with multicolor LED
– Filtered ventilation for safer use
– Cartridge with premium filament
– Ability to print with advanced materials such as Nylon and PC
– Remote control via Cubibot Android and iOS apps
– Smart features for effortless printing
– 5” cubed print size from a small 10” cubed footprint
Nano Dimension Ltd is focused on the research and development of advanced 3D printed electronics, including a 3D printer for multilayer printed circuit boards (PCB’s), and the development of nanotechnology-based conductive and dielectric inks, which are complementary products for 3D printers. Filmed at the IDTechEx Show!
At the forefront of nanotechnology, additive manufacturing, life sciences and single cell biology, Cytosurge FluidFM µ3Dprinter is the world’s first 3D printer capable of delivering sub-micron resolution in direct metal printing, while offering scalability and good prospects in both production cost and speed. The FluidFM technology opens a new world for metal object manufacturing and enables research opportunities in fields such as microelectronics, semiconductors, surface modification, microbots, sensors, material science and many other fields. Virtually any design can be offered to the system, including overhanging structures with 90 degree angles, without support structures or post processing steps. High-precision surface modification processes can also be executed by printing ultra-thin or structured objects and by depositing multiple metals at the target surface. With the FluidFM µ3Dprinter various metals like Cu, Ag, Au, Pt can be printed. The printing of other metals (Sn, Cd, Cr, Ni etc.) and various alloys are under investigation. Cytosurge won Best Development in 3D Printing Award Europe 2017. Filed at the IDTechEx Show!
TNO is a major player in a growing international network comprised of leading scientific institutes, companies with ambitious development profiles, universities and other partners in knowledge. Filmed at the IDTechEx Show!
Dr. Achin Bhowmik is Vice President and General Manager of the Perceptual Computing Group at Intel Corporation. He leads the development and deployment of interactive technologies and products based on natural sensing, intuitive interfaces, immersive applications and user experiences, branded as Intel® RealSense™ Technology. His presentation at the IDTechEx Show! on Nov. 16 2016 covers the latest progress with the technology. For more information about the event see http://www.idtechex.com
check back later, now trying to fix the audio quality on this video
Mike O’Reilly, Director of Aerosol Jet Product Management of Optomec shows their printed techology at the IDTechEx Show! In Berlin. Optomec shows printing on low temperature substrates and their LENS technology for prototyping parts using metals. LENS allows customers to create and repair metal parts easily and to create next generation alloys. Optomec allows for printing in both 3D and 2D across a variety of substrates, ranging in size from microcons to centimeters.
Optomec is a privately-held, rapidly growing supplier of Additive Manufacturing systems. Optomec’s patented Aerosol Jet Systems for printed electronics and LENS 3D Printers for metal components are used by industry to reduce product cost and improve performance. Together, these unique printing solutions work with the broadest spectrum of functional materials, ranging from electronic inks to structural metals and even biological matter. Optomec has more than 200 marquee customers around the world, targeting production applications in the Electronics, Energy, Life Sciences and Aerospace industries.
Nicolas Bernadrin, Deputy Managing Director of Ceradrop presents their equipment for printed electronics and 3D printing at the IDTechEx Show! In Berlin.
CERADROP designs and markets Materials Deposition Digital Printers exclusively for Printed Electronics Industry and Smart 3D Printing. Thanks to its modular-based scalable concept, CeraPrinter Series models present new opportunities for feasibility study and launch of new products into the Printed Electronics market. Combining several materials deposition technologies as well as the latest generation of curing modules, this equipment line permits to reach a wide range of application fields such as: membrane switch, antennas, sensors, passive components, interconnection, flexible solar cells (OPV), OLED Displays and others.
Kiss & Tell, an ARM Powered Shoe. Kiss & Tell was a concept that turned into a reality all done on ARM Technology. The idea, a shoe that can change the patterns on the straps based on the touch of a finger from an app on your mobile. For example, if you were invited to have tea with the Queen, the Union Jack could be displayed in seconds; if it was Valentine’s Day, hearts could be flashing. The sole, upper, and interchangeable heels were designed in Tinkercad on an ARM Powered Chromebook, printed using an ARM Powered 3D printer, and then spray painted with custom car paint. The circuitry and the LED designs were both done on Raspberry Pi 3. The shoe is powered by an ARM Cortex-M0+ that sits on an Arduino MKR1000 board that is hidden in the shoe’s upper. You can contact Sandra Larrabee of ARM Marketing to learn more about ARM or Kiss & Tell here: sandra.larrabee@arm.com
Merlin shows the Leonardo virtual reality kit that allows one to control 3D images displayed on the screen, using their proprietary controller that uses 3 IR sensors to monitor the position. The software also allows for direct import of 3D CAD files, supporting output to 3D printers. Based in Budapest, Hungary, the Leonardo sells for US$1000 and uses an open API that can be used for creating 3D games. The kit includes a pair of 3D glasses, the software suite and the wired controller.
Ben Jastram of 3D Labor shows samples of 3D printing at the IDTechEx Show! in Berlin, including a replication of Knut, healthcare educational models and artwork models used in a restoration project with various museums in Berlin. 3D Labor provides expertise and equipment to assist in the production of 3D rapid prototyping and printing.