M-Solv is a global company formed to advance laser micromachining and micro deposition applications. M-Solv performs application specific process research, design, engineering and manufacture for micron scale ablative machining and other specialised functional materials processes. This interview with IDTechEx provides more insight into the company and the industries it serves in. The video was taken at Printed Electronics USA. http://www.idtechex.com
Category: Printed Electronics
Producer and distributor of CVD graphene on different substrates is interviewed by IDTechEx at the IDTechEx event Graphene LIVE!. For more information see http://www.idtechex.com
Airwolf’s technicians use 3D printers to replicate more 3D printers nearly 24/7 at the company’s headquarters in Mesa CA. This video with IDTechEx was taken at the IDTechEx event 3D Printing LIVE!. Learn more at http://www.idtechex.com.
3Dponics is a 3D-printable hydroponics system that allows you to grow your own food and follow a healthy lifestyle. However, it is much more than that, especially when used in an educational environment such as a school or a club. 3Dponics teaches children of all ages about STEM (science, technology, engineering and math), and it encourages them to apply technology to their lives in meaningful and beneficial ways. This interview with IDTechEx was taken at the IDTechEx event 3D Printing LIVE!. For more information see http://www.IDTechEx.com
IHS DisplaySearch are Analysts reporting on the TV industry. Here’s a 13-minute video talking about the status of 4K (where more than 25% of TVs to be shipped in 2015 will be 4K, where the bulk of TVs at 50″ and above will be 4K by 2018). Everybody is doing 4K. Here’s a 13-minute video filmed at CES 2015, talking about explosive growth forecast for Quantum Dot LCD getting extremely pure and saturated light for amazing colors. The cheapest 4K TVs were sub-$500 on Black Friday, even top tier manufacturers such as Samsung and LG are also going below $1000 for 4K TVs at decent sizes, seeing entry level, medium level and step-up from many manufacturers. Good 4K is not just the pixels, it’s color, fast refresh rates, contrast, requires a good engine, display, amount of memory, reliability, heat management.
The SAES Getters Group is the world leader in a wide range of scientific and industrial applications that require high vacuum conditions or ultra-pure gases for nearly 70 years.
The Group’s materials and getter solutions have supported technological innovation in sectors including information displays and illumination, complex high-vacuum systems, thermal-vacuum insulation, ultra-pure gas purification systems, and the shape memory alloys’ market. In the organic electronics domain, SAES Getters is playing a leading role in key aspects of product performances and lifetime reliability, with efficient electron injection materials and a portfolio of dispensable hybrid getters for encapsulation. Learn more in this interview made at the IDTechEx Printed Electronics USA show.
For more see http://www.IDTechEx.com
For over 50 years, Hitachi Chemical’s focus on R&D has driven technological breakthroughs enabling our customers to manufacture thinner, lighter, and high volume products. As a result, our materials are currently in a vast number of today’s highly reliable and durable wearable devices. Learn more in this interview made at the IDTechEx Printed Electronics USA show.
For more see http://www.IDTechEx.com
PiXDRO is a Roth & Rau B.V. brand. Roth & Rau B.V., a member of Meyer Burger Group, has complete equipment design, assembly and application facilities in Eindhoven, the Netherlands. Our core focus is in the design, construction and delivery of industrial inkjet application development systems and the manufacturing of advanced high volume industrial inkjet systems. PiXDRO offers complete printing solutions including pre- and post-processing and automation solutions, thereby providing a complete solution for our customer’s requirements. Learn more in this interview made at the IDTechEx Printed Electronics USA show.
For more see http://www.IDTechEx.com
ISORG is a company involved in Organic and Printed Electronics that makes devices for large-area photonics and image sensing. The company offers a new generation of high performance opto-electronic sensors with 3D product integration capability recognizing any shapes and form factors. This video was made at the IDTechEx Printed Electronics USA event in Santa Clara. For more information see www.IDTechEx.com
Ohmatex provides elastic or non-stretch textile cables, conductive textiles to mount micro-electronics on, textile-based sensors or connection solutions. Learn more in this interview with IDTechEx, taken at Printed Electronics USA.
In Printed Electronics Agfa offer a PEDOT:PSS conductive polymer and, recently, a nano silver ink. The PEDOT:PSS material is used for antistatic optical films and device packaging. In this application AGFA coat the substrate themselves. AGFA also has developed a range of screen printed PEDOT:PSS conductive inks. The material is widely used in polymer capacitors. The emerging application is transparent electrodes. AGFA has also developed a nanosilver ink to support high conductivity over a long range with short range conductivity and transparency provided by PEDOT:PSS.
This interview with AGFA and IDTechEx was conducted at Printed Electronics USA – the largest event in the world on the topic. For more information see http://www.idtechex.com
GSI Technologies is a Burr Ridge, Illinois based specialty contract manufacturer of printed electronic devices and components. The company has decades of experience manufacturing electrodes, electroluminescent lamps, inlays, heating elements and other related components using roll-to-roll and automatic sheet fed printing processes. Whether you are a start-up or an OEM, GSI supports bringing your products off the lab bench and into full production. Many successful projects have been scaled from an initial prototype through to annual volumes in the millions to billions. Learn more in this interview made at the IDTechEx Printed Electronics USA show. For more see http://www.IDTechEx.com
At the IDTechEx conferences in Santa Clara, California, I have a conversation with Alfred Poor (Editor of Health Tech Insider), Dan Rosenbaum (Editor of Wearable Tech Insider), and James Hayward (Technology Analyst with IDTechEx). The wide ranging discussion covered wearable technology, printable electronics, and the other new technology on display at the conference. The three experts shared their views on the future of personal technology, and what will drive the growth of these markets.
XENON has over 50 years of experience providing high energy pulsed light lamps and systems to industries as diverse as medical devices, optical storage media, displays and semiconductors. Xenon engineers have solved low-temperature curing problems for new process technologies, based on the extraordinary range of power and system flexibility of pulsed light. High peak energy lamp systems are used in emerging applications such as sintering nanoparticle inks on low-temperature substrates and low-temperature curing thin film materials such as organic photovoltaics, OLED displays and multi-layer flexible circuits. Learn more in this interview at the IDTechEx Printed Electronics USA show. For more see http://www.IDTechEx.com
In this video we interview Dr Stephan Kirchmeyer, Global Technical Director, Display & Semiconductor from Heraeus. Dr Kirchmeyer is based at the Conductive Polymers Division of Heraeus and discusses their polymer and metal inks and their curing process technology. The interview was conducted at the IDTechEx Printed Electronics USA conference and tradeshow, the largest event on the topic in the World. For more information see www.IDTechEx.com.
Felix Ho, CEO of Taiwanese based YFY Group, a diversified conglomerate company owning companies such as E Ink, creating electrophoretic displays, and Arizon, creating RFID inlays, describes in this video their interest in printed electronics. Ho gave a keynote presentation at the IDTechEx Printed Electronics USA event in Santa Clara, Ca on November 19-20 2014, the world’s largest event on printed, flexible and organic electronics with around 3000 attendees and 200 exhibitors. Before the event, Ho reported, “YFY believes printed electronics will connect and empower everyday objects in ways we never imagined. We have eagerly followed the field for almost 2 decades, and never has the space been more active and relevant than now. We are anxious to see the field’s progress, and hope to draw inspiration from the participants at the industry’s leading event from IDTechEx.” For more information see www.IDTechEx.com
Production tools to enable Printed Electronics from NovaCentrix, shown at the IDTechEx Printed Electronics USA Event
As lead sponsor of the 2014 IDTechEx Printed Electronics USA event, NovaCentrix walks us through their impressive exhibition booth in this video providing insight on how to move from research and development through to commercial production in printed electronics. Here, NovaCentrix show their tools, including their PulseForge equipment that can sinter printed metallic conductive ink quickly and in room atmosphere, along with the accurate control systems and software enabling full control of the results. NovaCentrix also discuss their materials and how they help companies scale up to production, including their work with partners and new announcements. Learn more at www.novacentrix.com.
This video was taken at the IDTechEx event Printed Electronics USA on Nov 19-20 2014 in Santa Clara, Ca, USA, Learn more at www.IDTechEx.com
Nearly 3000 technology industry audiences and about 200 exhibitors convened at the Santa Clara convention center in silicon valley for the world’s largest emerging technology show hosted by IDTechEx, the leader in emerging technology research, consulting and events. The 2014 event featured Printed, Organic and Flexible Electronics, Wearable Technology, Graphene, Internet of Things, Super Capacitors, 3D Printing, Energy Harvesting and Storage among the topics at the conference and trade show. The event attracted attendees from 38 countries, featured over 215 presentations, over a dozen masterclasses taught by IDTechEx analysts and industry experts as well as networking events. The show floor also featured a Demonstration Street that showcased state of the art products and technologies from 45 companies, the Manufacturing Street showed products, processes and manufacturing equipment and offered attendees the opportunity to immerse themselves into the world of emerging technologies, to learn and conduct business. Mr Vijay Ullal, semiconductor industry leader, formerly President and COO of Fairchild Semiconductor and former Group President of Maxim Integrated, together with IDTechEx Chairman Dr. Peter Harrop, inaugurated the show and welcomed the attendees. Dr. Khasha Gaffarzadeh, head of consulting at IDTechEx takes us on a tour of the show floor.
IDTechEx is the leader in emerging technology research, intelligence, consulting and events such as this one that just concluded in Santa Clara, California. For additional information please reach them via http://www.idtechex.com
Guillaume Chansin (@GChansin) is one of the analysts from IDTechEx. We meet him in Santa Clara where the company is holding their annual US event. We talk about what we will see during the conference and why printed electronics can help make better wearable devices. He also explains printed sensors, flexible displays, and why we will not see flexible LCD anytime soon.
Dr Khasha Ghaffarzadeh, the Head of Consulting at IDTechEx discuss the printed electronics, graphene, and supercapacitor industries. Khasha looks at the potential but also some of the challenges facing graphene and draws parallels with the CNT world. Khasha defines the broad and diverse printed electronics industry and explains how there is a wide spectrum of commercial maturity.