Category: Exclusive videos

$180 Balance Scooter Factory Tour at Shenzhen Realtime

Posted by Gennie – October 4, 2015
Category: Robots, Exclusive videos, STMicroelectronics

Shenzhen Realtime show their balance scooter factory with assembly and testing lines. People ride those around the world, the speed can go up to 12km per hour, with 36W 4.4AH battery (charging time 2 hours), the cruising radius they say is up to 30km. The net weight of a smart balance wheel scooter is around 12kg, the Maximum load weight up to 125kg and maximum climbing angle is 15 degrees. They say that it is convenient or fun to ride those indoors at exhibitions, airports, in big office buildings, hotels and etc. Shenzhen Realtime’s price is around $180 for minimum orders of around 500pcs, contact them for info.

You can buy it from their amazon shop:
http://www.amazon.com/Drifting-Electronic-Unicycle-Intelligent-Monocycle/dp/B014KJ5DB2/ref=sr_1_1?ie=UTF8&qid=1441355263&sr=8-1&keywords=B014KJ5DB2&pebp=1441355351269&perid=066KXG86JHTB710Q8585

You can contact Shenzhen Realtime here:
Gerneral Manager:
Philip Yan
Email:info@cozyswan.com
Mobile: +86 15814470797 (also work with whatapps and wechat)

HDMI 2.0a with HDR

Posted by Gennie – October 3, 2015
Category: 4K UHD, Exclusive videos, IFA

The HDMI Forum has announced the specification for HDMI 2.0a and it’s designed to support the transmission of HDR video. HDR, short for high dynamic range, is a new content enhancement formatting that greatly increases the possible contrast ratio on ultra HD content from broadcast, Blu-ray and streaming sources. The result is a much richer and sharper image that consumers notice for its quality even more easily than they notice the pure resolution provided by 4K. HDMI 2.0 support bandwidth up to 18Gbps, 4K@50/60, (2160p), which is 4 times the clarity of 1080p/60 video resolution.

Printed and Plastic Electronics Community in the UK

Posted by Charbax – October 2, 2015
Category: Exclusive videos, IDTechEx

Martyn Cherrington from the KTN speaking to Raghu Das at the IDTechEx Show! The KTN is a Knowledge Transfer Network (KTN) funded by the UK Government through InnovateUK. One of the KTN’s key work programmes is the promotion and support of the printed and plastic electronics community in the UK. The KTN carry out these duties through a wide variety of knowledge exchange tools and activities including industry events, strategy workshops, training courses, international missions, seminars and company based tutorials. These activities cover the entire value chain, from basic science at universities through process development and manufacturing up to and including end user interaction with brand holders. For more information about the event see http://www.IDTechEx.com

NovaCentrix: Exhibitor Perspective on Printed Electronics Europe Event

Posted by Charbax – October 2, 2015
Category: Printed Electronics, Exclusive videos, IDTechEx

Interview with Stan Farnsworth from NovaCentrix at Printed Electronics Europe. NovaCentrix is focused on technologies and materials to enable manufacturing in Printed Electronics. For more information about the event see http://www.IDTechEx.com

NovaCentrix Hybrid Products and Applications with Printed Electronics at Printed Electronics Europe

Posted by Charbax – October 2, 2015
Category: Printed Electronics, Exclusive videos, IDTechEx

Interview with Stan Farnsworth from NovaCentrix. NovaCentrix is focused on technologies and materials to enable manufacturing in Printed Electronics. The PulseForge® photonic curing tools process high-temperature materials on low-temperature substrates. Applications include drying, sintering, annealing, or reacting metallic, non-metallic, and semiconductor inks, without damaging temperature sensitive substrates such as foils and plastics. With processing times of only milliseconds, surface depositions can be heated to melting or crystallization temperatures without damaging low temperature substrates. The very short processing times of the PulseForge® tools allow for high-speed processing rates in a roll-to-roll production format at speeds approaching 100 meters per minute. For more information about the event see http://www.IDTechEx.com

Linaro IoT & Embedded Group (LITE), open-source on “small” devices, ARM Cortex-A and Cortex-M

Posted by Charbax – October 1, 2015
Category: Internet of Things, Exclusive videos, Linaro Connect

Linaro’s newest focus group is being formed to work to improve open source software for the Internet of Things and Embedded devices, small devices with small memory, small power sources running embedded UI. Linaro CTO David Rusling talks about the role Linaro can work on to help optimize the software platforms for the Internet of Things and for Embedded. You can also see LITE being announced at the Linaro Connect opening keynote

FlexEnable Flexible LCD, E Ink and OLED for Wearable Devices

Posted by Charbax – September 29, 2015
Category: Displays, Wearables, Exclusive videos, IDTechEx

Indro Mukerjee of FlexEnable demonstrating their technology and products at Printed Electronics Europe, part of the IDTechEx Show! FlexEnable, based in Cambridge, UK, has developed the world’s first flexible transistor technology platform; the key to truly flexible and cost effective electronics over large and small surfaces. With over a decade of experience, IP development and technology awards, FlexEnable works together with customers to drive innovation across flexible sensors, smart systems and video-rate displays. FlexEnable’s technology platform enables new mobile and wearable products as well as sensor arrays and structural electronics that bring an extra dimension to the IoT (Internet of Things). Customers include OEMs, component manufacturers and materials suppliers. For more information see http://www.IDTechEx.com

Sonnenrepublik: Modular Autarkic Photovoltaic System Incorporated into a Solar Golf Cart

Posted by Charbax – September 29, 2015
Category: Energy Harvesting, Exclusive videos, IDTechEx

Dr Oliver Lang from Sonnenrepublik GmbH speaking to Ricky Purnell at Energy Harvesting & Storage Europe, part of the IDTechEx Show! The Sonnenrepublik GmbH has been founded in Berlin in late 2012. Its goal is the development and worldwide marketing of a novel modular device platform which consists of high-efficiency autarkic solar components in the small power range. Company founders Dr. Oliver Lang and Andreas Guba have wide experience and a big network in the field of autarkic photovoltaics and retail business. For more information see http://www.IDTechEx.com

Graphenea Predict the Immediate Market for Graphene: Composites, Polymers and Printed Electronics

Posted by Charbax – September 29, 2015
Category: Printed Electronics, Graphene, Exclusive videos, IDTechEx

Inigo Charola from Graphenea speaking to Thomas Keenan (IDTechEx) at Graphene & 2D Materials Europe. Graphenea is a leading graphene producer. The company exports graphene materials to 40 countries, supplies its products to Universities, Research Centers and Industries. Graphenea is part of a growing cluster of nanotechnology companies based at the nanotechnology research centre, CIC nanoGune. Graphenea is a partner of the Graphene Flagship. The EU launched this 10-year investment push research programme that aims to find ways of commercialising graphene. For more information see http://www.IDTechEx.com

Grafoid Working with Sister Company Focus Graphite to Commercialise Graphene

Posted by Charbax – September 29, 2015
Category: Graphene, Exclusive videos, IDTechEx

Chester Burtt from Grafoid speaking to Thomas Keenan at Graphene & 2D Materials Europe, part of the IDTechEx Show! Grafoid creates markets for their graphene investments and provide technical advisory and consulting services to manufacturers, suppliers and processors of graphene materials. Grafoid aim to promote a global standard for economically scalable, affordable graphene. Quality, cost, safety and production are some of the criteria they apply against their investment selection and in our co-developer search activities. For more information see http://www.IDTechEx.com

Better Future Factory: 3D Printing for a Sustainable Future through Plastic Recycling

Posted by Charbax – September 29, 2015
Category: Exclusive videos, IDTechEx, 3D Printers

Jonas Martens, CEO of Better Future Factory speaking to Rachel Gordon (IDTechEx) at 3D Printing Europe, and demonstrating their “Perpetual Plastic Project”. The Perpetual Plastic Project takes plastic waste and recycles it into a 3D printed object. Better Future Factory (BFF) is a multi-disciplinary design, environmental and engineering company. BFF finds and develops creative, realistic and sustainable solutions to the most pressing issues. Incorporating the underlying principles of the circular economy to close loops, cycle materials, increase value and develop businesses that contribute to a better future. For more information see http://www.IDTechEx.com

Talga Resources: 1-Step Extraction Process for Lower Cost Graphene (Factor 1000 Cheaper)

Posted by Charbax – September 29, 2015
Category: Printed Electronics, Graphene, Exclusive videos, IDTechEx

Talga Resources being interviewed at Graphene & 2D Materials Europe. Talga is a high tech materials company with its own source of integrated supply from multiple advanced high grade graphite projects in northern Sweden. The flagship project “Vittangi” is at development stage and like all the projects, benefits from established high quality infrastructure including low cost power, road, rail and ports. Two of the five graphite projects have unique ore that allows graphite and graphene to be liberated at an atomic level in an extremely cost effective way. The graphene produced is of a high quality and suitable for a range of large volume composite, additive and high technology applications. For more information see http://www.IDTechEx.com

Flexible Circuit Technologies in wearables: Nike Fuel Band, Skin Patches, Oxygen Sensors

Posted by Charbax – September 29, 2015
Category: Wearables, Smartwatch, Health, Printed Electronics, Exclusive videos, IDTechEx

Robin Lemson from Flexible Circuit Technologies being interviewed by James Hayward at IDTechEx Wearable Europe. Flexible Circuit Technologies, Inc. (Flexible Circuit) are a supplier of flex circuit design, rigid flex circuits, and flexible circuits and heaters. For more information see http://www.IDTechEx.com

DOWA Launch a Copper Nano Particle Ink for RFID Antenna at Printed Electronics Europe

Posted by Charbax – September 29, 2015
Category: Printed Electronics, Exclusive videos, IDTechEx

DOWA HD Europe is a Japanese smelter and an established manufacturer of various functional materials such as silver/copper/zinc/iron powder for electronic device and semiconductor wafer/ LED. DOWA also develop silver nano powder/ink for printed electronics, silver nano paste as an alternative to Pb solder and composite oxide powder for fuel cell/auto catalyst. For more information see http://www.IDTechEx.com

CYNORA Creating Iridium-Free OLED Materials

Posted by Charbax – September 29, 2015
Category: Displays, Printed Electronics, Exclusive videos, IDTechEx

Dr Georgios Liaptsis from CYNORA speaking to Dr Khasha Ghaffarzadeh at Printed Electronics Europe. CYNORA offers tailor-made solutions for organic light-emitting diodes (OLEDs). CYNORA provides the display and lighting markets with emitter materials, which make use of Singlet-Harvesting technology. CYNORA’s research encompasses developing optoelectronic materials, including theoretic calculations, and material-testing in OLED-prototypes. For more information see http://www.IDTechEx.com

PiezoTech: Creating Speakers Using Electroactive Fluorinated Polymers

Posted by Charbax – September 29, 2015
Category: Speakers, Printed Electronics, Exclusive videos, IDTechEx

Dr Fabrice Domingues Dos Santos from PiezoTech being interviewed by Dr Khasha Ghaffarzadeh (IDTechEx) at Printed Electronics Europe, part of the IDTechEx Show!. Piezotech, an Arkema Group Company, designs and produces fluorinated electroactive polymers and inks for printed electronics. For more information see http://www.IDTechEx.com

Advanced Graphene Products: Graphene Revolution using Liquid Metal

Posted by Charbax – September 29, 2015
Category: Graphene, Exclusive videos, IDTechEx

Professor Piotr Kula from Advanced Graphene Products (AGP) and the Lodz University of Technology being interviewed by Thomas Keenan (IDTechEx) at Graphene & 2D Materials Europe . The company, using a production method created by the Institute of Materials Science and Engineering (Technical University Lodz) has developed an unique, extremely efficient graphene production process. Graphene is now grown on liquid metal. AGP says that this is an edge of a revolution. This new technology shifts graphene production to an industrial level. It is now possible to manufacture large, high quality graphene sheets for a reasonable price. Using liquid metal also results in superior qualities never seen before. For more information about the event see http://www.IDTechEx.com

ImageXpert: Inkjet Industry for Printed Electronics

Posted by Charbax – September 29, 2015
Category: Printed Electronics, Exclusive videos, IDTechEx, 3D Printers

Kyle Pucci of ImageXpert inc, being interviewed at Printed Electronics Europe. ImageXpert Inc. is a leader in part inspection systems and tools, including the JetXpert dropwatcher, for use in applications such as printed electronics, 3D printing, textiles, biomedical, and more. For more information, visit imagexpert.com and jetxpert.com. For more information about the event see http://www.IDTechEx.com

ARM increases investment into Linaro: Ian Ferguson of ARM and David Rusling of Linaro

Posted by Charbax – September 26, 2015
Category: Exclusive videos, Linaro Connect, ARM

Ian Ferguson ARM VP of WorldWide Marketing and Strategic Alliances discuss with David Rusling Linaro CTO about the status and roadmap for the ARM Server, what ARM is doing with Linaro, what Linaro member companies are doing with Linaro, to grow and ecosystem around ARM devices, ARM announced that they will double their engineering investment into Linaro.

Qualcomm Dragonboard 410c 64bit development board at Techcrunch Disrupt

Posted by Charbax – September 24, 2015
Category: Development Boards, Exclusive videos, Qualcomm, Techcrunch Disrupt, Android, Ubuntu, Windows

Qualcomm talks about the Dragonboard 410c now to be launched into mass production soon available on http://arrow.com, enabling affordable ARMv8 64bit low-cost development, with a quad-core ARM Cortex-A53 with Adreno 306 GPU, with integrated WiFi, Bluetooth and GPS, also expandable according to the http://96boards.org platform.