Category: Tradeshows

BroadBit metallic sodium batteries, 10x more power than Lithium-Ion, 5-minute full charge

Posted by Charbax – May 30, 2016
Category: Exclusive videos, IDTechEx

BroadBit has invented and is commercializing a new type of metallic sodium battery in two families: Hi-Energy batteries with twice the energy per weight and Hi-Power batteries with ten times the power as todays lithium-ion batteries. BroadBits Hi-Power batteries can be fully charged in as little as 5 minutes. BroadBits batteries are made with abundant and cheap raw materials (e.g. table salt) and its manufacturing process is simpler than Li-ion. With these advantages, BroadBit expects its cost per kWh to be a third that of Li-ion when in mass production. Moreover, initial tests of the technology show no detectable degradation in battery performance over 600 cycles. This is because, unlike Li-ion, there are no side reactions, dendrite formation or mechanical stress due to ion intercalation.

These innovations, if BroadBit can turn them into mass production and meet their promises, could make mobile devices lighter, faster charging and longer lasting and will finally enable low-cost, high range and convenient electric vehicles including cars, buses, bikes and even electric air planes and bring about the long awaited post combustion era of transportation. BroadBit is now scaling production of its proprietary electrolytes, anodes and cathodes and is looking for partners worldwide to assemble batteries from its components.

Filmed in 4K at IDTechEx Berlin 2016 using the Sony AX53

You can contact BroadBit here:
david.brown@broadbit.com
http://broadbit.com

$340 Android POS with 15” touchscreen on RK3188 with printer,8*USB,SCSI port by Joysmart

Posted by stromium – May 28, 2016
Category: Exclusive videos, China Sourcing Fair, POS

Joysmart shows Point-of-Sale devices that come as an all-in-one package, integrating multiple functions and accessories. Here we see their flagship model with a 15” touchscreen and RK3188 chip, running Android or Windows (with an Intel CPU). It features 8 USB ports for accessories, two SCSI ports for peripherals, Ethernet (RJ-45) port, headphone and microphone jacks. The Windows version costs US$380 while the Android version sells for US$340. Another model on display features RFID tag recognition, barcode scanner, printer, and magnetic swipe card integrated into the main unit with dual displays, selling for US$310.

$16 Military grade shockproof, water resistant Bluetooth speakers by GSOU

Posted by stromium – May 28, 2016
Category: Speakers, Exclusive videos, China Sourcing Fair

GSou shows Bluetooth speakers doubles as a clock with alarm, with a built-in rechargeable battery, bulk price at US$16. The more popular model on display is a patterned metal-clad unit that comes with a 12400mAh battery, bulk price at $22. The company even has on display speakers conforming to military standards that can survive rough usage including free-fall drops, bulk price at US$16.

Delta custom ASIC design for IoT integrates “Thor” NFC sensor integration chip

Posted by Charbax – May 25, 2016
Category: Printed Electronics, Exclusive videos, IDTechEx

Delta of Denmark provides ASIC turnkey development services and system design with expertise within payment, UHF, NFC, Electronic toll collection (ETC), toll road (GSS), acoustics, optics, certification, reliability testing, EMC testing, electronic testing. Here Delta is showing their Integration of CPU, 32kB memory, 16 AD converter, ISO 14443A and ISO 15693, temperature sensor (accuracy +/-0,5C (abs), +/-1C (relative), Low power clock, Low power stoarage mode (below 0,1µA), passive and active mode possible, sensor IO for digital (SPI) and analogue. Available as QFN and tested die. Filmed at the IDTechEx Printed Electronics Europe 2016 Berlin in 4K using Sony AX53.

$100 Sunco S091 4K@30fps Actions Camera on Ambarella A12, $60 4K@24fps Actions Camera on NTK96660

Posted by Gennie – May 25, 2016
Category: Cameras, 4K UHD, Exclusive videos, Novatek, HKTDC Electronics Fair, Sunco, Ambarella

Sunco S091 is a 4K actions camera powered Ambarella A12, features with SONY IMX117 sensor and 170degree wide angle lens, support 4K@30fps, 2K@60/30fps, 1080P@100/60/30fps, 720P@120/60fps H.264 video recording. It comes 2’’Full HD screen,with build-in micro-SD card support up to 64GB, and an 60 meters waterproof case. It also with mini HDMI jack, support video streaming output to big screen by HDMI cable. With WiFi inside, it also support wireless control from remote and mobile phone via APP. Bulk price at $100 for 1000pcs order.
Sunco also shows S032, the 4K@24fps actions camera powered by Novatek NTK96660, bulk price at $60 for 1000pcs order, and the single lens 360 degree camera as well.

You can contact Sunco here: (Let them know if you watch this video)
Jason, Sales Manager
Mobile:+86-139 0298 6423
Tel:+86-755 8374 8050
manager@suncohk.com
Skype: suncosales001
http://www.suncohk.com

Coros Smart Helmet with bone conduction speakers, Bluetooth and impact (bump) sensor

Posted by stromium – May 23, 2016
Category: Wearables, Exclusive videos, China Sourcing Fair

Coros has manufactured a smart helmet for cyclists with smart functionality. It features Bluetooth connectivity to a smartphone for taking calls, with the speaker and microphone integrated into the strap. The speaker works through bone conduction, transmitting the sound through one’s jaw and not ears. One can also select a certain Bluetooth channel allowing multiple Coros users to talk to each other. The bump sensor detects impact and sends a message to a pre-selected number. A bicycle-attached remote allows for music and call control.

$25 Sunchip CX-R9, 4K Android TV Box on RK3229

Posted by Gennie – May 21, 2016
Category: Set-top-boxes, 4K UHD, Exclusive videos, Rockchip, HKTDC Electronics Fair, Sunchip, Android

Sunchip CX-R9 is the latest Android TV Box powered by Rockchip RK3229 Quad-core ARM Cortex-A7 with ARM Mali-400 GPU, runs Android4.4, 1GB RAM, 8GB Nand Flash on board, comes with 3pcs USB host, SD card reader, 2.4G WiFi and 100M Lan port. With HDMI2.0 port, support 10bit 4K H.265 hardware decoding. Bulk price at $25 for 1000pcs order.

You can contact Sunchip here: (let them know you watched the video)
Kobe Chen, Sales Manager
kobe@sunchip-tech.com
Mobile: +86 13751103656
Phone: +86 755 26733959
Skype: Kobechen6132
QQ: 1191324838
http://www.sunchip-tech.com

Atek Gaming full mechanical backlit Keyboards, high-DPI Gaming mice

Posted by Gennie – May 21, 2016
Category: Gaming, Exclusive videos, China Sourcing Fair, Aikun, Keyboard

Atek ships over 5 million keyboards and mice every year. Atek shows their latest product line of mice and keyboard from wired, wireless and gaming. The Atek Morpheus GX990 is a high end gaming keyboard with heavy aluminum body and special rubber feet, it will not moving however you use it. With LED backlight and exclusive mechanical switches. Atek also shows the GX service gaming mice, with 2500dpi optical sensor, 6 functions buttons and customized LED light.

You can contact Aikun here:
Mail : celia@aikun-china.com / master@atek-china.com / rob@aikun-china.com (Let them know you watched this video)
http://www.atek-china.com/
Contact information : http://www.aikun.co/html/about/contactus/
Tel.: (+86)755- 6110 2468,(+86)755- 6110 2858
Factory Address:A2 building, Lianhe Industrial Park, Fengtang Road,Fuyong, Baoan, Shenzhen, China

$22 3D Drawing Pen, 36 colors available by Shenzhen Dewang Model

Posted by stromium – May 20, 2016
Category: Exclusive videos, China Sourcing Fair

Shenzhen Dewang Model Ltd shows their 3D drawing pen that allows one to draw free-form 3D objects. The pen uses a feed of ABS that is heated and extruded as “drawing ink”, solidifying on cooling to form the structure. Two models are available for US$22 and US$26(bulk price for 1000pcs), with the more expensive one featuring temperature control through an LCD. 36 colours of input material are available.

VimTag P1, 720P Smart Cloud Camera with Remote Motion Control and 2-way Voice

Posted by stromium – May 20, 2016
Category: Cameras, Exclusive videos, China Sourcing Fair

VimTag is a security solutions company that demonstrates here the P1 Smart cloud camera, which is a connected camera that supports streaming to iOS, Android, OS X and Windows platforms at 720p resolution. It features built-in motion detection, two-way voice conference, up to 64GB of local micro-SD card storage, cloud streaming, and multiple users can view the stream at the same time. The camera is also motion controlled, allowing users to swipe on the streamed content to turn the camera in real time. Prices start at US$89 and go up to US$189 depending on the model.
You can check more at:https://vimtagusa.com/

Centre for Process Innovation (CPI) for the United Kingdom’s High Value Manufacturing Catapult

Posted by Charbax – May 16, 2016
Category: Health, Printed Electronics, Exclusive videos, IDTechEx

Tom Taylor, Director of New Business at CPI, shows a flexible OLED and flexible Pragmatic processors printed on plastic with a novel moisture barrier for medical devices at the IDTechEx Show! in Berlin. Tom also talks about ways to manufacturer medicines, new glucose meter sensors, and how they assist inventors in manufacturing new devices. The Centre for Process Innovation (CPI) is a UK based technology innovation centre and the process arm of the High Value Manufacturing Catapult. Established to support the UK process manufacturing industry, CPI collaborates with universities, SMEs and large corporates to help overcome innovation challenges and develop next generation products and processes. CPI also shows a Flexible Processor made by PragmaticIC Filmed in 4K using Sony AX53.

DCS shows SYSCO cutting and lamination machine

Posted by Charbax – May 16, 2016
Category: Health, Printed Electronics, Exclusive videos, IDTechEx

Kevin Deloge of Dorey Converting Systems shows a cutting and lamination machine at the IDTechEx Show! in Berlin, and discusses customization options manufacturers can add to the machine for their production needs. The machine can be adapted to produce items from RFID tags to labels to medical bandages. Dorey focuses on the development and service for SYSCO’s high precision rotary die cutting and laminating systems in Europe. The equipment at the forefront of the latest technologies offer opportunities for sophisticated industries based on laminating adhesive or non-adhesive materials for applications in electronics, automotive, medical, RFID, NFC tags and labels. Filmed in 4K using Sony AX53.

Babaali Smart Bicycle Helmets with Smart Glass Rear View Assist, Turn Signals and Bone Conduction

Posted by Gennie – May 14, 2016
Category: Wearables, Smart Glass, Exclusive videos, China Sourcing Fair, BABAALI

Babaali Smart Cycle Helmet With Smart Glass and Rear View Assist features a rear view camera and a Smart Glass at the front of the helmet to provide Bicycle riders with a clear and unobstructed view of the road in front and behind you at the same time. With the screen it also can support map navigation, speed, communications and any other handsfree app features during the bicycle ride. With Bluetooth inside, it also support answer a phone-call or stream music from your smart phone to the helmet, Babaali also show others smart bicycle helmets that they are already selling on the market, one with built-in LED turn signal indicators, controlling the LED lights by wireless remote control to turn right/left, double flash and fixed stop signal light. It is $129 with free shipping on Babaali’s website.

Distributors can contact Babaali here:
Amy, CEO
info@babaali.cc (please let them know you watched this video)
Check more info about Babaali Cycle Helmet here:
http://www.babaali.co/smart-cycle-helmets/

also see Babaali’s official videos here:

3D Labor 3D Printing in Berlin

Posted by Charbax – May 13, 2016
Category: Exclusive videos, IDTechEx, 3D Printers

Ben Jastram of 3D Labor shows samples of 3D printing at the IDTechEx Show! in Berlin, including a replication of Knut, healthcare educational models and artwork models used in a restoration project with various museums in Berlin. 3D Labor provides expertise and equipment to assist in the production of 3D rapid prototyping and printing.

ShareBot 3D Printing at Dimension Alley

Posted by Charbax – May 13, 2016
Category: Exclusive videos, IDTechEx, 3D Printers

Amin Torabi of ShareBot and Dimension Alley shows custom 3D printed creations, including clothing, watches, cell phone cases and miniatures at the IDTechEx show in Berlin, and discusses how 3D printing can be used to make prosthetics, dental molds and other healthcare items. Dimension Alley is a 3D printing store and café in Berlin where we print using FDM and DLP 3D printers as crafting tools to materialize amazing objects from spare parts to comets. Dimension Alley was opened in 2013 and is a center for design for 3D printing, courses and workshops, scan and print service and printer sales.

Toyota Hydrogen Fuel Cell Cars

Posted by Charbax – May 13, 2016
Category: Cars, Exclusive videos, IDTechEx

Andy Fuchs of Toyota Motor Europe discusses hydrogen and electric vehicles and infrastructure at the IDTechEx Show! in Berlin. Toyota, is one of the world’s top automaker and creator of the Prius and the Mirai fuel cell vehicle. In addition to automotive products, its subsidiaries manufacture rubber and cork materials, steel, synthetic resins, automatic looms, and cotton and woolen goods. Others deal in real estate, prefabricated housing units, and the import and export of raw materials.

IDTechEx Interview: Toyota Hydrogen Fuel Cell Cars

Posted by Charbax – May 13, 2016
Category: Cars, Exclusive videos, IDTechEx

Dr. Peter Harrop, Chairman of IDTechEx interviews Andy Fuchs of Toyota Motor Europe (https://www.toyota-europe.com/) at the IDTechEx Show! in Berlin about future electronic vehicles and infrastructure. Toyota discusses the range of options for passenger vehicles, electric buses and hybrid and electric manufacturing equipment. Toyota, is one of the world's top automaker and creator of the Prius and the Mirai fuel cell vehicle. In addition to automotive products, its subsidiaries manufacture rubber and cork materials, steel, synthetic resins, automatic looms, and cotton and woolen goods. Others deal in real estate, prefabricated housing units, and the import and export of raw materials.

Smart Clothing by Pauline Van Dongen

Posted by Charbax – May 12, 2016
Category: Printed Electronics, Energy Harvesting, Smart Clothing, Exclusive videos, IDTechEx

At the IDTechEx Show! in Berlin, designer and keynote speaker, Pauline Van Dongen shows her wearable clothing designs, merging technology with fashion design. Included are a solar charging shirt.

Pauline combines new technologies with traditional techniques to constantly renovate craftsmanship. Working closely with companies from the field of science and innovation, Pauline aims to merge fashion and technology giving life to scientific creations.

Keynote: Pauline Van Dongen Smart Clothing

Posted by Charbax – May 12, 2016
Category: Smart Clothing, Exclusive videos, IDTechEx

At the IDTechEx Show! in Berlin, designer Pauline Van Dongen gives a keynote talk on the merging of technology and fashion design.

Pauline combines new technologies with traditional techniques to constantly renovate craftsmanship. Working closely with companies from the field of science and innovation, Pauline aims to merge fashion and technology giving life to scientific creations.

Lenovo WiGig wireless laptop dock

Posted by stromium – May 12, 2016
Category: Laptops, Exclusive videos, CES

Lenovo ThinkPad WiGig dock is meant to connect wirelessly to laptops to provide added functionality, such as increased USB ports and a DisplayPort. The dock uses the 60GHz WiGig protocol for a data rate of 4.6Gbps and is backward-compatible with 802.11 (WiFi). It costs US$250 and is currently on sale.