Category: IDTechEx

Comberry Solid-state supercpacitors

Posted by – September 22, 2017

At the IDTechEx Show Europe 2017 in Berlin, Russian start-up Comberry showcased its all-solid-state supercapacitor. Technology analyst Lorenzo Grande interviewed the minds behind this project.

Henkel Stretchable electronic materials used to make formable, non-flat circuits

Posted by – July 8, 2017

Henkel AG & Company, KGaA, is a German chemical and consumer goods company headquartered in Düsseldorf, Germany. It is a multinational company active both in the consumer and industrial sector. Founded in 1876, the DAX 30 company is organized into three globally operating business units (laundry & home care, beauty care, adhesive technologies) and is known for brands such as Loctite, Persil, and Fa amongst others. In the fiscal year 2016, Henkel reported sales of 18.7 billion euros and an operating profit of 3.172 billion euros. More than 80 percent of its 51,350 employees work outside of Germany. Filmed at the IDTechEx Show!

Libralato rotary engine for hybrid vehicles

Posted by – July 8, 2017

Libralato hybrid engine is a new kind of rotary engine with a new thermodynamic cycle. The engine was first concept tested in 2011, followed by more rigorous proof of concept testing and analysis in 2014, which indicated that its revolutionary 9-phase cycle is effective and is capable of exceptionally high efficiency and low emissions. Libralato claims that their engine might be the most efficient compact engine in the world; at least as efficient as a diesel engine (c.40%) using gasoline but half the size and weight. Filmed at the IDTechEx.com Show!

Playtronica, play music with fruits, cats and anything

Posted by – July 8, 2017

Playtronica is an open-source toolkit for creating immersive sensory interactions interactive musical experiences. Touchme and Playtron are devices that transform human touch into midi notes. Work with any conductive material, vegetables, cats and humans. Sounds are generated by Playtronica’s web sampler or any other online midi synth. Filmed at the IDTechEx Show!

You can watch some musical sessions played using the Playtronica here, here and here.

Doppel Rhythmic pulse wrist wearable to stay calm and focused

Posted by – July 8, 2017

Doppel creates a rhythmic pulse that you feel on the inside of your wrist as a heartbeat like vibration. We do not simply perceive this rhythm, but we entrain to it – a faster rhythm makes us feel more alert, and a slower one calms us down. The effect is similar to listening to upbeat or slower music. But with doppel, there’s no noise and no distraction. Filmed at the IDTechEx Show!

VTree Solar Tree for squares and parks with WiFi and phone charging

Posted by – July 3, 2017

VTree is Creating Smart Cities building a solar future based on three powerful concepts: solar energy, internet and great design. Focused on solar powered, Smart Street Furniture, VTREE has bases in Sao Paulo, Bucharest and Lisbon and was born of online collaboration within this triangle. Their flagship product, the Fractal VTREE aims to activate brands and public initiatives through a tree-shaped solar powered meeting point with wi-fi, charging station for scooters and mobile phones and touch screen interaction. The tree is also capable of tracking human behaviour within a 250m radius of any network point, produce heatmaps and other data analysis whilst allows clients to engage with users in real time in many different ways. Filmed at the IDTechEx Show!

PrintoCent printed flexible lighting

Posted by – July 3, 2017

PrintoCent Innovation Center commercializes the research results of Printed Intelligence and Optical Measurements. Application focus areas in PrintoCent range from rapid disposable diagnostics, smart flexible lighting and wearables to Internet-of-Things with sensors and energy harvesting. With the multitude of possibilities there are great opportunities to new type of products and to disrupt existing value chains in all industries. Filmed at the IDTechEx Show!

Nano Dimension 3D printed multi-layer PCBs

Posted by – June 27, 2017

Nano Dimension Ltd is focused on the research and development of advanced 3D printed electronics, including a 3D printer for multilayer printed circuit boards (PCB’s), and the development of nanotechnology-based conductive and dielectric inks, which are complementary products for 3D printers. Filmed at the IDTechEx Show!

Jenax J.Flex, Flexible Li-Ion Rechargeable Battery


Jenax J.Flex is an innovative flexbile battery freeing design limitations without sacrificing power enabling new form factors for flexible smartphones, flexible wearables and other ideas for flexible future devices based on Li-Ion Gel polymer electrolyte enabling rapid movement of lithium ion with no overheating, high energy density, low internal resistance and that can be stable even with bending fatigue. Filmed at the IDTechEx Show!

Electric Taxi with Battery Swap, 550kg, Adaptive City Mobility Prototype

Posted by – June 25, 2017

Adaptive City Mobility is the development of a complete, emission-free mobility concept for cities. Ten cooperating technology ventures are constructing a small electric light-weight vehicle of the vehicle category L7E and developing it for series production. Combined with an innovative software, hardware and battery exchange system it depicts an extensive solution for the urban mobility of the future, E Ink displays are used on the back for advertisement.

Filmed at the IDTechEx Show!

IDTechEx tours SID Display Week 2017

Posted by – June 15, 2017

IDTechEx Analyst Dr Guillaume Chansin walks us around the SID Display Week 2017 exhibition floor at the Los Angeles Convention Center, featuring Samsung, LG, JDI, BOE, CLEARink, E Ink and more. Talking about the state of flexible displays, OLED, Micro LCD, Plastic displays, E Ink, CLEARink, LG’s Wallpaper OLED, Samsung’s Quantum Dot LCD, and more. Check back for many more videos from the SID Display Week, and I am also posting many videos from the latest IDTechEx show over the coming weeks at http://138.2.152.197/category/tradeshows/idtechex/

$0.01 Flexible Plastic ARM Processor by PragmatIC


Enabling Trillions of ARM processors to be made cheaply to be embedded everywhere as envisioned by ARM owner Masayoshi Son, PlasticARM is an implementation of an ARM Cortex-M0 based 32-bit microprocessor SoC in plastic. Using PragmatIC’s technology, the flexible integrated circuit (FlexIC) is implemented in thin film metal oxides on a polymer substrate, with a total thickness of less than 10um. The latest version uses a 1um cell library, delivering a 10x improvement in footprint over the last 2 years, and significantly advancing the state-of-the-art in printed logic. PlasticARM demonstrates the potential for PragmatIC’s ultra-thin and ultra-low-cost plastic electronics to extend from smart packaging into areas such as wearables and security. You can read more about PragmatIC at http://pragmaticprinting.com This video was filmed at the IDTechEx Show!

You can watch the Keynote presentation by PragmatIC at IDTechEx here:

FlexEnable Plastic Flexible Organic LCD (OLCD) Displays

Posted by – May 21, 2017

FlexEnable demonstrates conformable, glass-free Plastic based organic LCDs that are 4x thinner than regluar glass-based LCD, 10x lighter weight, shatterproof, 30 times more bendable and conformable, 3 times higher mobility resulting in higher resolution and upward 1000 times lower power leakage enabling lower power consuming LCD displays, all at similar or lower cost than regular glass based LCD when mass produced! Read more about the FlexEnable Flexible Plastic OLCD at their website: http://www.flexenable.com/technology/flexible-olcd/ Filmed at the IDTechEx Show!

Solar-powered car (4-seater) by Solar Team Eindhoven

Posted by – May 21, 2017

Solar Team Eindhoven creates an energy efficient 4-seater family car to make solar cars sexy and user friendly. The World Solar Challenge encourages teams to push the limits of technology, where the Solar Team Eindhoven won the Cruiser Class at Bridgestone World Solar Challenge in Australia where the car covered 3,000 kilometers all the way from Darwin to Adelaide carrying two occupants at an average speed of 76 km/h. It is the ultimate challenge for solar-powered vehicles. Solar Team Eindhoven contributes to a clean world. Their passion is to develop a solar car that is ready for the market of tomorrow. Imagine a world where cars no longer need fossil fuels, where cars are energy positive. Filmed at the IDTechEx Show!

Flexible low-cost solar power by Kolon Industries

Posted by – May 21, 2017

Kolon Industries presents their flexible organic photovoltiacs for energy harvesting, their flexible OPV with claimed 3-5 years life is great in its apparel and should be everywhere. This has 50% transparency and a bending radius of only 10mm, a low cost roll to roll printing process resulting in “Payback less than 0.2 years”, focusing on the four major business divisions, industrial materials, chemical, films/electronic materials, and fashion, the company is aiming to be a leader in each industry by providing this flexible solar power. Kolon Industries with its Flexible Solar Panel won the Best In Show award at IDTechEx Show in Berlin 2017. Filmed at the IDTechEx Show!

TriDInnov adds electronics on plastics

Posted by – May 21, 2017

Startup company TriDInnov provides additive metallization for plastic and composite materials electronic packaging, is linked through a closed partnership with equipment manufacturer Kelenn Technology, launching the new Kelenn Technology DMD 100, an off-contact digital dispenser which deposits the TDI thick film formulation EOPROM (primer formulation for metallization process) showcasing their prototype circuits which have been manufactured with the DMD 100, depositing their EOPROM thick film formulation on molded device. TriDInnov’s technology brings to the electronic packaging market a new manufacturing process which reposition the MID towards new business areas such as to add value on composite materials especially in the automotive area. They are to invest in a technology platform in order to manufacture MID prototypes circuits for their customers in order to push their technology acceptance on the market place. Filmed at the IDTechEx Show!

Cytosurge FluidFM µ3Dprinter, world’s first 3D printer at sub-micron direct metal printing

Posted by – May 21, 2017

At the forefront of nanotechnology, additive manufacturing, life sciences and single cell biology, Cytosurge FluidFM µ3Dprinter is the world’s first 3D printer capable of delivering sub-micron resolution in direct metal printing, while offering scalability and good prospects in both production cost and speed. The FluidFM technology opens a new world for metal object manufacturing and enables research opportunities in fields such as microelectronics, semiconductors, surface modification, microbots, sensors, material science and many other fields. Virtually any design can be offered to the system, including overhanging structures with 90 degree angles, without support structures or post processing steps. High-precision surface modification processes can also be executed by printing ultra-thin or structured objects and by depositing multiple metals at the target surface. With the FluidFM µ3Dprinter various metals like Cu, Ag, Au, Pt can be printed. The printing of other metals (Sn, Cd, Cr, Ni etc.) and various alloys are under investigation. Cytosurge won Best Development in 3D Printing Award Europe 2017. Filed at the IDTechEx Show!

TEGnology thermoelectric Energy Harvesting for self-powered Sensor Network

Posted by – May 21, 2017

TEGnology develops and commercializes new materials to be used in thermo electric generation, the material is cheaper and more heat-resistant than other materials on the market has developed costing less than 5% of the competition and is manufacturable in industrial quantities. With an ROI of less than two years, their two new materials exploit waste heat energy recovery very efficiently, useful for markets such as automotive, maritime, bio-fuel, Combined Heat & Power and the Sensor Industry. TEGnology replaces batteries, requires no maintenance, it’s Made in Denmark, it is Low cost and available, uses commonly available materials, no tellurium or lead enables Self-powered wireless IOT sensor for temperature, pressure, vibration and more, it’s high temperature energy harvesting for industry. Filmed at the IDTechEx show.

Bainisha body motion capture using flexible wearable sensors and electronics

Posted by – May 21, 2017

Bainisha shows their body motion capturing in their high performance wearable systems consisting of wearable second skin patches for remote motion capturing, in which batteries, antennas, electronics and sensors (including both the Bainisha sensor and IMU’s to form a hybrid system) are embedded, that can be worn 24/7 up to 3 weeks, delivering a 4D super accurate topological map of the measured body part for top level analytics. Filmed at the IDTechEx Show.

8Power self-powered Sensor Network (IoT with no batteries, no charging)


8Power presents the Track100, a 100% self-powered Energy Harvesting LoraWan LPWA GPS Tracker for creating Sensor Networks that run on vibrations and solar. These can be installed all over the place, never having to go back to change the batteries nor recharging the devices to power the Sensor Network IoT. 8Power Ltd received the Best Technical Development within Energy Harvesting Award at the IDTechEx Show. Filmed at the IDTechEx Show.