In this quick laptop thermal retrofit demo, Frore Systems swaps the stock fan assembly in a 14-inch Samsung Galaxy Book5 Pro for four AirJet Mini solid-state cooling modules. The baseline machine is shown sustaining about 20 W of CPU power with audible fans; the modified unit is tuned to hold about 24 W, roughly a 20% uplift, while aiming for near-silent operation and a more sealed chassis. https://www.froresystems.com/products/airjet-mini
AirJet Mini is designed as a thin active heat-sink module rather than a rotary fan: it uses ultrasonic actuation to move air through micro-vents, producing high back pressure (around 1,750 Pa) in a compact form factor. Frore rates the original Mini at roughly 5.25 W of heat removal at about 21 dBA while drawing up to about 1 W, so scaling to multiple modules can add meaningful sustained cooling without the tonal fan whine that often dominates thin laptops at load in air.
What matters here is sustained package power, not short boost: once a notebook hits its steady-state thermal limit, firmware clamps PL1 and clocks settle. Holding 24 W instead of 20 W can translate into higher all-core frequency, steadier interactive latency, and fewer dips from thermal throttling in long compiles, renders, or exports. The footage is filmed at CES Las Vegas 2026, and it’s a useful example of how solid-state airflow can change the acoustics-perf trade space at a booth.
As always, outcomes depend on the whole stack: heat spreader quality, vapor chamber or heat pipe routing, fin and vent geometry, and how the BIOS enforces PL1/PL2 with skin-temperature limits. AirJet-style modules can also support dust-resilient, water-resistant industrial design because airflow can be routed through controlled paths rather than large open fan grilles, which may help consistency over time in real work.
I’m publishing about 100+ videos from CES 2026, I upload about 4 videos per day at 5AM/11AM/5PM/11PM CET/EST. Check out all my CES 2026 videos in my playlist here: https://www.youtube.com/playlist?list=PL7xXqJFxvYvjaMwKMgLb6ja_yZuano19e
This video was filmed using the DJI Pocket 3 ($669 at https://amzn.to/4aMpKIC using the dual wireless DJI Mic 2 microphones with the DJI lapel microphone https://amzn.to/3XIj3l8 ), watch all my DJI Pocket 3 videos here https://www.youtube.com/playlist?list=PL7xXqJFxvYvhDlWIAxm_pR9dp7ArSkhKK
Click the “Super Thanks” button below the video to send a highlighted comment under the video! Brands I film are welcome to support my work in this way 😁
Check out my video with Daylight Computer about their revolutionary Sunlight Readable Transflective LCD Display for Healthy Learning: https://www.youtube.com/watch?v=U98RuxkFDYY
