Category: Printed Electronics

Page 11 of 19 1 8 9 10 11 12 13 14 19

The Danish Technological Institute development of nanomaterials for printed electronics

Posted by Charbax – February 17, 2016

Interview with The Danish Technological Institute at the Printed Electronics USA event, part of the IDTechEx Show! The Danish Technological Institute develops, applies and disseminates research- and technologically-based knowledge for the Danish and International business sectors; for example, a range of nanomaterials for printed electronics applications. For more information see http://www.teknologisk.dk and http://www.IDTechEx.com

Jones Packaging anti-counterfeiting using T+Sun Touchcode touchscreen sensitive coding

Posted by Charbax – February 7, 2016

Jones Packaging specialize in printed packaging, contract packaging and medication dispensing and delivery products. For more information see http://www.jonespackaging.com filmed at at http://www.IDTechEx.com Printed Electronics USA

Infratab Cold Chain Freshness Monitoring System

Posted by Charbax – February 7, 2016

Infratab makes Freshtime, a freshness-monitoring system of RFID- and NFC-enabled tags that monitor elapsed time and the temperature of perishable items (food, medicines, flowers , blood, adhesives, ammunition etc). Freshtime integrates these variables in a 100-point metric that tells users concurrently "how fresh" the product is. For more information see http://www.infratab.com Filmed at at the Internet of Things Applications exhibition, part of the IDTechEx Show!

Holst Centre Smart Clothing with flexible displays and sensors

Posted by Charbax – January 31, 2016

Holst Centre at Printed Electronics USA, shows wearable technology applications of their products and prototypes. Holst Centre is an independent R&D center that develops technologies for wireless autonomous sensor technologies and flexible electronics. The Holst Centre’s business model is to partner with industry and academia based around roadmaps and programs. For more information see http://www.holstcentre.com and http://www.IDTechEx.com

NovaCentrix PulseForge Demo at IDTechEx Printed Electronics USA

Posted by Charbax – January 27, 2016

Stan Farnsworth from NovaCentrix gives a tour of NovaCentrix’s PulseForge equipment at the IDTechEx Printed Electronics USA event. NovaCentrix is focused on technologies and materials to enable manufacturing in Printed Electronics. The PulseForge photonic curing tools process high-temperature materials on low-temperature substrates. Applications include drying, sintering, annealing, or reacting metallic, non-metallic, and semiconductor inks, without damaging temperature sensitive substrates such as foils and plastics. For more information see http://www.novacentrix.com and http://www.IDTechEx.com

NthDegree Nth Light, Flexible Printed LED Lights

Posted by Charbax – January 25, 2016

NthDegree’s ultra-thin, flexible, lightweight LED lights are printed on either a flatbed screen press or a high speed roll-to-roll printing press. Filmed at the Printed Electronics USA event. For more information see http://www.ndeg.com/ and http://www.IDTechEx.com

DuPont printed electronics for displays, photovoltaics, automotive and more

Posted by Charbax – January 17, 2016

Interview with DuPont at the IDTechEx Show! DuPont Microcircuit Materials manufactures specialized inks for a variety of printed electronic applications in the display, photovoltaic, automotive, biomedical, telecommunication and consumer products markets. DuPont Microcircuit Materials’ stretchable/formable ink developments are also designed for use in wearable and in-mold electronics applications.

For more information see http://www.mcm.dupont.com and http://www.IDTechEx.com.

LinnStrument with Tangio Printed 3D Force Touch

Posted by Charbax – January 12, 2016

Phi Bui of the San Francisco Conservatory of Music plays the LinnStrument at the Printed Electronics USA event, a one-of-a-kind expressive, polyphonic multi-dimensional MIDI controller. At the heart of the LinnStrument is a custom touch sensor designed by Roger Linn Design and fabricated by Tangio Printed Electronics. Like any fine musical instrument, LinnStrument must have highly consistent touch sensitivity across its surface, and this is provided by Tangio’s precise fabrication process. LinnStrument's patent-pending multi-touch technology captures three dimensions of each finger's movement, polyphonically. As a solution for haptic and expressive input in automotive, consumer electronics and medical devices, Tangio Printed Electronics, creates flexible 3D touch sensors that can be inside the most advanced, touch-sensing products in the world.

The core technology of Tangio’s 3D Touch sensor is that of the Force-sensing resistor. Force-sensing resistors are an evolution of membrane switch technology, based on the same user interface design principals and made using similar manufacturing techniques. The force sensor is essentially an analog, multi-position switch, while the membrane switch is simply ON/OFF. What defines a force-sensing resistor is its unique characteristic of dynamic conductance / resistance relative to the amount of pressure applied to the device. In general, the more pressure applied to the surface of the sensor, the greater the conductance / the lower the resistance.

Force-sensing resistors are used for qualitative rather than quantitative or precision measurements. They are found in a wide range of industry applications: automotive, human interface devices, toys, medical equipment, musical instruments, sporting equipment and safety equipment.

This video also features an interview with the National Research Council Canada. The National Research Council (NRC) is the Government of Canada's organization for research and development. NRC's Printable Electronics (PE) initiative coordinates key industrial areas - materials, ink, printing, and packaging - as a springboard for a profitable, large-scale PE sector. For more information see http://www.tangio.co, http://www.nrc-cnrc.gc.ca/eng/solutions/collaborative/pe_index.html and http://www.IDTechEx.com

$300 Starkpos M8200 Mobile POS(Point of Sales) Devices Android 4.2

Posted by Gennie – November 30, 2015

Starkpos M8200 is an All-in-One mobile POS(Point of Sales) device with SIM card slot, WiFi,Bluetooth and 23 buttons of keyboard. It can used anywhere with 2'' printer, Barcode scanner, Magnetic Card reader, Smart Card Reader, GPS options. Runs Android 4.2, it also can support all most Android apps. Bulk price at $300 to $500 with different options.

You can contact Starkpos here: (Please let them know if you watch this video)
Serkan ÖNEL
serkan@starkpos.com
Mobile:+852 3127 5687

Shenzhen Shining Explores European Market for Precision Coating Equipment

Posted by Charbax – October 5, 2015

Mrs Jing Zhang from ShenZhen Shining Automation Co., Ltd being interviewed by Raghu Das from IDTechEx at Printed Electronics Europe. Shenzhen Shining Automation Co., Ltd is a manufacturer of precision coating equipment for Li-ion batteries, printed electronics, opticals , flexible printed circuits, flat panel displays, solar cells, pharmaceutical and tape industries. For more information about the event see http://www.IDTechEx.com