Category: Printed Electronics

Page 10 of 19 1 7 8 9 10 11 12 13 19

PolyIC touch sensors at Printed Electronics USA

Posted by Charbax – April 11, 2016

Interview with PolyIC at the Printed Electronics USA event. PolyIC develops and markets products based on the platform technology printed electronics. PolyIC offers products from the field Touch Sensors & Passive Devices. Touch Sensors & Passive Devices Touch Sensors based on the PolyTC® technology offer transparent, conductive and flexible possibilities for touch screens and capacitive keys in any variants. This technology also enables the setup of flexible circuit structures as passive devices for a variety of further applications. For more information see http://www.polyic.com and http://www.IDTechEx.com

Lawter Harima Nanojet nano conductive inks for RFID and touch panel displays

Posted by Charbax – April 11, 2016

Lawter, a Harima Chemicals, Inc. Company at the Printed Electronics USA event. Lawter serves the graphic arts, adhesives, specialty coatings, aroma chemicals and the synthetic rubber industries. Lawter produces nano conductive inks for applications such as RFID antennas and touch panel displays for tablets and smart phones. For more information see http://www.lawter.com and http://www.IDTechEx.com

AIA Labs, Architects of Intelligent Applications (A.I.A.)

Posted by Charbax – April 11, 2016

Interview with Architects of Intelligent Applications (A.I.A.) at IDTechEx Wearable USA. AIA designs, develops and manufactures wearable technology. Located in Toronto, Canada AIA’s facilities include a printed electronics laboratory, design studio, cut and sew floor and computerized knitting division. For more information see http://www.aialabs.ca and http://www.IDTechEx.com

Komura Tech 2µm Printed Electrodes and Bio-sensors at Printed Electronics USA

Posted by Charbax – April 3, 2016

Komura-Tech at the Printed Electronics USA exhibition develops printed electronics, a fusion of the latest printing technologies and electronics technologies. Komura-Tech’s scope encompasses not just electrical equipment and communications but also medical care, the environment and more.

Intrinsiq Materials: Copper Ink and Pastes for Printed Electronics

Posted by Charbax – March 5, 2016

Interview with Intrinsiq Materials at the Printed Electronics USA event. Intrinsiq Materials is an advanced materials company with expertise in the manufacture, functionalisation and dispersion of nanoparticles and ink formulation. Specialising in low cost nanoparticle-based copper conductive inkjet inks and screen print pastes for the printed electronics industry, Intrinsiq also supply prototyping and production laser precision sintering systems (LAPS-60) for use with their ink and paste products. Newly released products include copper seed layer ink for glass and plastic substrates which activates commercially available electroless copper chemistry, nano phosphors for security inks and thermoelectric materials. For more information see http://www.intrinsiqmaterials.com and http://www.IDTechEx.com

BeBop Sensors: Printed Electronic Sensors for Music, Medical and Automotive

Posted by Charbax – March 5, 2016

Interview with BeBop Sensors at the IDTechEx Wearable USA event. BeBop uses smart fabrics to create sensor solutions for OEMs. Where things or people interact, BeBop Sensors comprehend force, location, size, weight, shape, motion and presence across any size, resolution and geometry. BeBop uses a proprietary Monolithic Fabric Sensor Technology that integrates all of the sensors, traces and electronics into a single piece of fabric. BeBop technology senses and displays 3D maps of pressure, bend, location, rotation, angle, and torsion. For more information see http://www.bebopsensors.com/ and http://www.IDTechEx.com

Renesas Microcontrollers for Printed Electronics

Posted by Charbax – March 5, 2016

This is an interview taken with the Renesas Electronics Corporation at the Printed Electronics USA event. Renesas Electronics Corporation is a supplier of microcontrollers and of advanced semiconductor solutions including microcontrollers, SoC solutions and a range of analog and power devices. For more information see http://am.renesas.com and http://www.IDTechEx.com

Henkel next-generation semiconductor packaging in printed electronics

Posted by Charbax – February 19, 2016

Henkel Electronic Materials LLC is a division of global material supplier, Henkel Corporation. Headquartered in Irvine, California with sales, service, manufacturing and advanced R&D centers around the globe, Henkel is focused on developing next-generation materials for a variety of applications in semiconductor packaging, industrial, consumer, displays and emerging electronics market sectors. With a broad portfolio of silver, carbon, dielectric and clear conductive inks, Henkel is making today's medical solutions, in-home conveniences, handheld connectivity, RFID and automotive advances reliable and effective. Watch this interview taken at the IDTechEx Printed Electronics event http://www.IDTechEx.com/peusa

Thin Film NFC OpenSense for anti-counterfeiting

Posted by Charbax – February 19, 2016

Bill Cummings of Thin Film Electronics interview with Raghu Das from IDTechEx at the Printed Electronics USA exhibition. Thinfilm is creating printed systems that include memory, sensing, display, and wireless communication. Thinfilm's roadmap integrates technology from an ecosystem of partners to enable the Internet of Everything by bringing intelligence to disposable goods. For more information see http://www.thinfilm.no and http://www.IDTechEx.com

EMS shows MIMO Baby by Rest Devices, Wins Best Commercialization Award at the IDTechEx Show!

Posted by Charbax – February 18, 2016

Engineered Materials Systems won “Best Commercialization Award” at IDTechEx Printed Electronics USA. This award was given for the use of their stretchable conductive ink in the successful commercial product MIMO Baby, made by Rest Devices. Rest Devices developed breakthrough wearable technology that combined capacitive sensing, blue tooth transmission of real-time biological data, and a clever way to integrate chip and power. What they lacked was a conductive ink that would meet their requirements of soft, stretchable and durable. Engineered Materials Systems submitted their flagship silver conductive ink, CI-1036 which worked very well according to Rest Devices engineers and was a key enabler to commercialization of MIMO Baby. CI-1036 is applied to proprietary film and insulated with a proprietary top-coat. This combination is reported by Rest Devices to withstand 90 wash/dry cycles of the MIMO Baby kimono with the failure mode not due to the conductive circuitry. Engineered Materials Systems, Inc. (EMS, Inc). is a global manufacturer of conductive inks, insulators, conductive adhesives for the printed electronics market. EMS has developed a highly stretchable/ flexible conductive ink for wearable electronics. For more information see http://emsadhesives.com/ and http://www.IDTechEx.com